************************************************************
**** Quick Flash Instructions ****
************************************************************

· Unzip file, copy the "ROM" file to a diskette in "A" drive.
(Diskette does not have to be bootable).

· Make sure your using the on board floppy controller.

· With system powered off and diskette with "ROM" file in "A" drive.

· Hold down on the "CTRL & HOME" keys and then power on system.

· There will be no video and notice floppy drive being accessed.

· You should hear 1 beep let go of keys.

· Then you will hear 2 beeps and then 3 beeps.

· System should reset and notice new BIOS release date at top of screen.

· Enter BIOS SETUP run the OPTIMAL SETINGS OPTION.

· Change BIOS SETTINGS for your configuration.

************************** WARNING *************************
If you are using the "password" option in the BIOS, you must DISABLE the
Password BEFORE you flashes the BIOS. This BIOS uses a new core and saves the
Password at a different location.

If you flash the BIOS without disabling the password, you may not be able
To get into the setup. If this happens, you must drain the CMOS first.